High-strength structural plastic (the anchorage plastic) (anchor agent) 
 The economy barreled anchorage plastic anchor and strong, simple construction, without specialized tools, materials cost and economic characteristics. When used according to the requirements of drilling, and clear the hole of dust. By A: B = 100:3 to 5 ratio of clay and hardener with a putty knife or other tools quickly and evenly mix, with the attendant poured into the hole, immediately reinforced slowly screw hole to the surface a slight overflow should be prohibited touched, curing reinforcement and applied load. 
 Injection type anchorage glue 
 The high strength injection the anchorage plastic is an epoxy resin, modified amine curing agent and polymer materials as the main composition of the solvent-free two-component structural adhesives. Easy to operate, anchor construction, high strength, durability and fire resistance is very strong, tensile strength, compression, anti-vibration, no expansive force. 
 The main purpose 
 Building structure reinforcement, building framework anchorage, bridge expansion of reinforcement, concrete pavement repair, fixed tunnel pipeline, shear wall anchorage. 
 Installing the technical parameters 
 Standard value of bearing capacity and installation of technical parameters 
 Reinforced-level bar diameter (mm) hole diameter (mm) anchor depth (mm) tensile strength (KN) standard tensile strength (KN) 
 6 10 ≥ 80 5.8 6.6 
 I 8 12 ≥ 120 10.5 11.8 
 I 10 14 16.4 18.5 ≥ 150 
 ≥ 12 16 180 23.6 26.5 
 II 10 14 23.5 26.5 ≥ 140 
 II 12 33.7 37.9 16 ≥ 160 
 II 14 18 ≥ 190 46.2 51.5 
 II of 16 ≥ 220 60.1 67.3 20 
 II of 18 ≥ 270 76.2 85.2 22 
 II of 20 ≥ 300 94.2 105.2 25 
 II of 22 113.8 127.3 28 ≥ 330 
 II of 25 32 ≥ 380 147.1 164.4 
 II of 28 184.7 206.1 35 ≥ 480 
 II 30 38 ≥ 590 211.8 236.7 
 II 32-40 ≥ 650 241.1 269.0 
 Product Specification: 20kg 10kg 5kg Shelf life: 6 months (from light below 25 ℃) Construction temperature: -5 ℃ -40 ℃ Product Executive the standard Q.CG033-2004